FERRO ClassicPlus
THE BESTSELLER FOR SAFETY AND COMFORT
Our best selling core with a 10-year non-bow guarantee – FERRO ClassicPlus from Moralt. With resistance to warping, low thermal insulation and burglar resistance testing. Manufactured with a engineered core, high-quality timber laminated and finger-jointed stiles and rails and with a wide offering of weatherproof face layers. The flat steel stabilizer is thermally separated so preventing thermal bridges. FERRO ClassicPlus guarantees maximum stability and achieves the best values in all performance classes according to EN 14351-1. Use this as the basis of your CE marking offer. Rely on Moralt, your door system- and know-how provider.
FERRO ClassicPlus can be used universally and can be processed easily and cost-effectively thanks to its high-quality components and low weight. Thanks to the best performance characteristics (EN14351-1) and its excellent price-performance ratio, it ensures you attractive returns and the highest level of customer satisfaction. Ideally suited for even the most difficult climates.
QUALITY FEATURES:
The 5-layer veneer board
A 5-layer, AW-glued veneer plywood panel made from carefully selected woods.
Advantages:
- The decorative veneer layer consists of high-quality, sliced – or Fineline veneers, which are joint-glued together as shown. Our recommendation is to shorten the blank at both ends.
- The Moralt external door blank achieves a visual veneer structure on both sides, which corresponds to a door of very high quality.
Burglary resistance
Better safe than sorry: Our blanks offer all the prerequisites for producing burglary-resistant front doors: resistance class RC3/ RC2 according to DIN EN 1627: 1999-04 on the surface of the blank.
Flat steel stabilizer
A flat steel stabilizer consisting of two flat pieces of steel grooved into the wood and glued over the entire surface. This works according to the static principle of tension and compression.
Advantages compared to a U-shaped steel and square profiles:
- No thermal bridge due to thermal separation of the two pieces of steel .
- Free of cavities, so no condensation forms inside.
- The flat steel stabilizers do not show on the surface even when the building moisture is high.
- Low weight by avoiding unnecessary steel joints.
Frame
Unmistakable handcrafted charm: Our stiles and rails are made of solid, carefully selected - or laminated, finger-jointed timber.
PUR rigid foam
Highly recommended: The inner core is made of polyurethane.
Advantages:
- Low weight, excellent thermal insulation.
- Foam can withstand extreme temperatures: short-term up to 250 °C/482 °F, long-term up to 110 °C/230 °F.
- Compressive strength is sufficient to place insulating glass on it in the light cutout.
- Thanks to production under controlled conditions, the polyurethane quality is continuously at a high level.
LVL core middle layer
The LVL core with upright-standing annual rings, consisting of approx. 5 mm wide peeled veneers glued together. The optimum strength is attained through offset joints within the inner core layer.
Advantages:
- Highest Highest strength values from the offset laminated joints.
- Optimum surface smoothness thanks to the even distribution of the individual veneers and the consistent position of the annual rings.
Local wood species
The LVL core with upright-standing annual rings, consisting of approx. 5 mm wide peeled veneers glued together. The optimum strength is attained through offset joints within the inner core layer.
Advantages:
- Highest Highest strength values from the offset laminated joints.
- Optimum surface smoothness thanks to the even distribution of the individual veneers and the consistent position of the annual rings.
